Oil inspection and replacement
2023-3-24 Print

Check the oil and level before driving

1. Place the motorcycle on a flat ground and support it with a main support;

2. Loosen the oil dipstick to see if the oil level is between the upper and lower scales. If the amount of oil is too small, add the specified oil as appropriate.

Replace lubricating oil and clean filter

1. Warm up the engine for 2-3 minutes and shut down the engine;

2. Place an oil container under the engine;

3. Unscrew the oil drain hole cover, remove the oil drain hole cover, and take out the engine oil filter screen and spring;

4. Step on the recoil starter several times to help discharge all residual oil;

5. Place the spring, filter screen, and oil drain hole cover in a cleaning agent for cleaning;

6. Check whether the 0-type sealing ring and filter screen are in good condition. If there is any damage, replace them, and then install them in the reverse order of disassembly;

7. Fill in new engine oil between the upper and lower scale lines. Note: The engine oil should be replaced three times during the running-in period of a new vehicle.